EasyManua.ls Logo

Hitachi HDS725050KLA360 - 12 Command Descriptions; Table 72. Command Set (1 of 2)

Hitachi HDS725050KLA360
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
107
12.0 Command descriptions
The table below shows the commands that are supported by the device. Table 75: “Command Set (subcommand)”
on page 109 shows the subcommands that are supported by each command or feature.
Table 73: Command Set (1 of 2)
Protocol Command
Code
(Hex)
Binary Code Bit
7 6 5 4 3 2 1 0
3 Check Power Mode E5 1 1 1 0 0 1 0 1
3 Check Power Mode* 98 1 0 0 1 1 0 0 0
3 Configure Stream 51 0 1 0 1 0 0 0 1
3 Device Configuration RESTORE B1 1 0 1 1 0 0 0 1
3 Device Configuration FREEZE LOCK B1 1 0 1 1 0 0 0 1
1 Device Configuration IDENTIFY B1 1 0 1 1 0 0 0 1
2 Device Configuration SET B1 1 0 1 1 0 0 0 1
2 Download Microcode 92 1 0 0 1 0 0 1 0
3 Execute Device Diagnostic 90 1 0 0 1 0 0 0 0
3 Flush Cache E7 1 1 1 0 0 1 1 1
3 Flush Cache Ext EA 1 1 1 0 1 0 1 0
2 Format Track 50 0 1 0 1 0 0 0 0
3 Format Unit E7 1 1 1 1 0 1 1 1
1 Identify Device EC 1 1 1 0 1 1 0 0
3 Idle E3 1 1 1 0 0 0 1 1
3 Idle* 97 1 0 0 1 0 1 1 1
3 Idle Immediate E1 1 1 1 0 0 0 0 1
3 Idle Immediate* 95 1 0 0 1 0 1 0 1
3 Initialize Device Parameters 91 1 0 0 1 0 0 0 1
3 NOP 00 0 0 0 0 0 0 0 0
1 Read Buffer E4 1 1 1 0 0 1 0 0
4 Read DMA C8 1 1 0 0 1 0 0 0
4 Read DMA C9 1 1 0 0 1 0 0 1
4 Read DMA Ext 25 0 0 1 0 0 1 0 1
1 Read Long 22 0 0 1 0 0 0 1 0
1 Read Long 23 0 0 1 0 0 0 1 1
1 Read Log Ext 2F 0 0 1 0 1 1 1 1
1 Read Multiple C4 1 1 0 0 0 1 0 0
1 Read Multiple Ext 29 0 0 1 0 1 0 0 1
3 Read Native Max ADDRESS F8 1 1 1 1 1 0 0 0
3 Read Native Max ADDRESS Ext 27 0 0 1 0 0 1 1 1
1 Read Sector(s) 20 0 0 1 0 0 0 0 0
1 Read Sector(s) 21 0 0 1 0 0 0 0 1
1 Read Sector(s) Ext 24 0 0 1 0 0 1 0 0
4 Read Stream DMA 2A 0 0 1 0 1 0 1 0
4 Read Stream PIO 2B 0 0 1 0 1 0 1 1
3 Read Verify Sector(s) 40 0 1 0 0 0 0 0 0
3 Read Verify Sector(s) 41 0 1 0 0 0 0 0 1
3 Read Verify Sector(s) Ext 42 0 0 0 1 - - - -
3 Recalibrate 1x 0 0 0 1 - - - -
2 Security Disable Password F6 1 1 1 1 1 0 1 0
3 Security Erase Prepare F3 1 1 1 1 0 0 1 1
2 Security Erase Unit F4 1 1 1 1 0 1 0 0

Table of Contents

Related product manuals