Hitachi HDS725050KLA360 - Mounting Hole Locations

Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
56
7.5.2 Mounting hole locations
The mounting hole locations and size of the drive are shown below. All dimensions are in mm.
Figure 1: Mounting hole locations
Thread (1) (2) (3) (4) (5) (6) (7)
6-32 UNC 41.28±0.5 44.45±0.2 95.25±0.2 6.35±0.2 28.5±0.5 60.0±0.2 41.6±0.2
Side View
(5)(6) (7)
Bottom View
(1)(2)
(3)
(4)
I/F Connector
(4X) Max. penetration 4.0 mm
(6X) Max. penetration 4.5 mm