Hitachi HDS725050KLA360 - Page 141

Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
127
Table 91: Identify device information (Part 3 of 7)
Word Content Description
64 0003H Flow Control PIO Transfer Modes Supported
15- 8(=0) Reserved
7- 0(=3) Advanced PIO Transfer Modes Supported
'11' = PIO Mode 3 and 4 Supported
65 0078H Minimum Multiword DMA Transfer Cycle Time Per Word
15- 0(=78h) Cycle time in nanoseconds (120 ns, 16.6 MB/s)
66 0078H Manufacturer's Recommended Multiword DMA Transfer Cycle Time
15- 0(=78h) Cycle time in nanoseconds (120 ns, 16.6 MB/s)
67 00F0H Minimum PIO Transfer Cycle Time Without Flow Control
15- 0(=F0h) Cycle time in nanoseconds (240 ns, 8.3 MB/s)
68 0078H Minimum PIO Transfer Cycle Time With IORDY Flow Control
15- 0(=78h) Cycle time in nanoseconds (120 ns, 16.6 MB/s)
69-74 0000H Reserved
75 00XXH Queue depth
15- 5 Reserved
4- 0 Maximum queue depth
76-79 0000H Reserved
80 00FCH Major version number
15- 0 (=Fch) ATA-2,ATA-3,ATA/ATAPI-4,ATA/ATAPI-5,ATA/ATAPI-7
81 001AH Minor version number
15- 0 (=1Ah) ATA/ATAPI-7 T13 1532D revision 1
82 74EBH Command set supported
15(=0) Reserved
14(=1) NOP command
13(=1) READ BUFFER command
12(=1) WRITE BUFFER command
11(=0) Reserved
10(=1) Host Protected Feature set
9(=0) DEVICE RESET command
8(=0) SERVICE interrupt
7(=1) RELEASE interrupt
6(=1) LOOK AHEAD
5(=1) WRITE CACHE
4(=0) PACKET Command Feature set
3(=1) Power Management Feature Set
2(=0) Removable feature set
1(=1) Security feature set
0(=1) SMART feature set