Hitachi HISCREW V PLUS NEXT Series - Configuring Control Functions; Accessing Setting Mode (F mode); Setting Function Parameters

3.4 How to Set Control Functions
■ Various settings (instantaneous power interruption (IPI), remote operation,
capacity control setting, pressure setting, etc.)
Switches display from monitor mode to setting mode (F mode).
重新设定
显示转换
１
１
2
１
2
Fordetails,seetheFmodetable.
Toaltersettings,changethevalueswiththe
buttons.(seep.14)
Displays000
th
itemofFmode.
ChangeseachtimeFUNCTIONispressed.
Forward
Back
PressENTERtoenterthesettings.
Back
Pressandhold
simultaneouslyforat
least3seconds.
Performsame
operationtoreturn.
Displayssettingcontents.
F000：（0：Setssingleunitoperation.）
F000：（1：Setsmultipleunitcontrol.）
13
3. HOW TO OPERATE [How to Set Control Functions]