4-57 ●Update the print contents at a fixed interval (Time count)
4.12 Update the print contents at a fixed interval (Time count)
(Optional UX-D,E)
(1) Overview
●The print contents are updated at a preset update internal (minutes) timing.
●When the time that becomes the standard is set one time a day, the print contents are updated to a preset
value when that time arrives.
●The time count characters can be set at only one place in one message. Up to a maximum of 3 digits can be
set.
●The time count conditions are set at the Time count conditions screen.
●Range, reset value, reset time, and renewal period can be set as conditions.
●Updating of the print contents is always increment + 1.
●One time count condition is held for each message. To input the same time count condition at another
message, use the “Duplicate” and “Paste” functions. Input the time count conditions, memorize them by
pressing Duplicate , and press Paste at the Time count conditions screen of the other message.
●The time count characters cannot be input at the same count block as another count.
Time Value
00:00 FD
00:30 FE
01:00 FF
01:30 FG
02:00 GA
02:30 GB
03:00 GC
03:30 GD
(Example) Range AA to GG, renewal period 30 minutes, reset time 05:00, reset value “AA”
Time and count value
Time Value
04:00 GE
04:30 GF
05:00 AA
05:30 AB
06:00 AC
06:30 AD
07:00 AE
07:30 AF
Time Value
08:00 AG
08:30 BA
09:00 BB
09:30 BC
10:00 BD
10:30 BE
11:00 BF
11:30 BG
Time Value
12:00 CA
12:30 CB
13:00 CC
13:30 CD
14:00 CE
14:30 CF
15:00 CG
15:30 DA
Time Value
16:00 DB
16:30 DC
17:00 DD
17:30 DE
18:00 DF
18:30 DG
19:00 EA
19:30 EB
Time Value
20:00 EC
20:30 ED
21:00 EE
21:30 EF
22:00 EG
22:30 FA
23:00 FB
23:30 FC
(See “(2) Operation” for the time count conditions setup procedure of this example.)
To Next Page
Loading...
Need help?
General
