Hitachi IJ UX - When an Error Occurred at the Start of Operation

3-5 ●Start operation
3.1.2 When an error occurred at the start of operation
Stop ink ejection by pressing the SHUTDOWN → No-cleaning stop .1
TEST
STARTPRINTING SHUTDOWN
SETTINGS LOGIN
Shutdown Process Confirmation No.051
CONFIRMATION ×
Shutdown will stop the ink jet.
Solution 1. To stop the ink jet, press <OK>.
2. To stop the ink without cleaning, press <No-cleaning stop>.
OK Close
No-cleaning
stop
Press SHUTDOWN .
Press No-cleaning stop .