Hitachi IJ UX - Overwrite Messages to be Printed

●Overwrite messages to be printed 4-12
Print description 2015.07.0712:45
Menu
Com=0
[Stop ]
Ink operating time 1００(hours)
Cumulative op. time １００(hours)
Print count １０００(prints)
Ink pressure  ０．０００(MPa；standard value:０．２５５)
Message name [ ]
−
＋
Change
message
Select
message
Overwrite
message
Adjustprint
parameters
Operation
management
Current user ID : user2
Inter-
laced
Printcount
reset
Startup
Manual
Makeup
Ink
4.4 Overwrite messages to be printed
(1) Overview
●Overwrites the current message by the same name.
●If the message is saved using the overwrite message function when updating the count value, the same
print description can be selected later.
●Message name cannot be changed.
See “4.6 Save created messages” for message save.
(2) Operation
(a) Previous HMI
The Print description screen is displayed.
Press Overwrite message .
“Same Print Data Found” message is displayed.
1
Press Enter .
Save is performed.
2
Overwrite message