Hitachi IJ UX - Changing the Login User

●Changing the login user 6-12
Login management menu 2015.07.0712:45
Back
Com=0
[Stop ]
Login history Select login user Password setup
User conditions
setup
Create new User ID
Using environment
setup
Delete User ID
HOME
Startup
Manual
Makeup Ink
Select login user 2015.07.0712:45
Back
Com=0
[Stop ]
admin user2 user3
user4
user5 user6
user7 user8 user9
Current user ID : user9
6.4 Changing the login user
(1) Functions
●Logs in again as a different user from currently logged in user.
●When logging in, selects the user and inputs the password.
●The administrator defines the user name and password and password protection setting in advance.
The password protection setting can be changed for each user beforehand. See the Technical Manual.
●When the administrator sets the login procedure necessary at power-on, the login user is selected at
power-on.
●The login history for the last 30 times is displayed on the login history screen.
(2) Operation
(a) Previous HMI
Press Login management in the environment setup menu.
The Login management menu is displayed.
1
Press Select login user .
The Select login user screen is displayed.
2
Displays the
history of
logged in
users.
Select login
user
Sets the password.
However, it is not
displayed when
authorization is not
given from the
administrator.
The user ID currently
logged in is displayed.
The saved user
name is displayed.
Conditions
setup
New user ID
create
Environment setup