Hitachi IJ UX User Manual

4-91 ●Set the print specifications
Adjustprintparameters 2015.07.0712:45
85 ０SC
1/1
100% ＋−
OFFLINE
STOP
ID:User2
×
Character Height
Character Width
2
Print Start Delay
Pulse Rate Div. Factor
Reciprocative Print Start Delay
Scanning Unit
Forward
Direction
Reverse
Direction
０SC
０SC
Scanning Unit
SETTINGS LOGINEDITADJUSTSAVEOPENHOME
− ＋
− ＋
− ＋
− ＋
SAMPLE1
(Note) If various settings are changed when the printing is performed frequently,
the faults such as "Print Overlap fault", "Print Data Changeover In
Progress V" or "Invalid Print Start Timing" may occur.
(b) New HMI
Press menu ADJUST .
The Adjust print parameters screen will be displayed.
1

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English