Hitachi IJ UX - Page 212

7-32 ●Backing up data to USB memory
2
Copy data
ＵＳＢ→ＩＪＰ
2015.07.0712:45
Com=0
[Stop ]
Data type

Copy data
Print data
Standard pattern
User pattern
Select the copy target and then press <Start copy>.
Serial number
９９９９９９９９
Folder to be copied
９９９９９９９９
Enable
Enable
Enable
Disable
Disable
Disable
Startcopy
Cancel
HOME
Proc. Status
Individual
copy
Makeup Ink
Copy data
ＵＳＢ→ＩＪＰ
2015.07.0712:45
Com=0
[Stop ]
Copying in progress.
Serial number ９９９９９９９９
Folder to be copied
９９９９９９９９
Data type

Copy data
Print data ０／ ２０
Standard pattern ０／ １５
User pattern ０／ ４
Proc. Status ０／ ３９
Enable
Enable
Enable
Disable
Disable
Disable
HOME
Accessing to USB memory. Don't remove USB memory.
Makeup Ink
Press Copy data (USB→IJP) .
The copy data screen is displayed.
3
Select the folder (serial number) to be copied.
4
Select the type of data to be copied.
5
Press OK .
A copying in progress screen is displayed.
6
Remove the USB memory.
After data copying is complete, the screen returns to the auxiliary function menu.
Selects the type
of data to be copied.
Selects the folder
to be copied.
Start copy
Shows the data
copying progress.