●Replenishing the makeup 8-13
When a new cartridge bottle is set, press the lever handle down and it into the
printer.
6
Lever handle
● Be careful not to get your hand or fingers pinched when pushing down the
lever handle. (See the figure below.)
CAUTION
Lever handle
The cartridge replacement (makeup refill) is now completed.
Press <OK> at the IJ printer guidance screen.
Pressing <OK> confirms that makeup refill is complete.
7
Lever handle
Lever handle
● The IJ printer on which the “Makeup Level Sensor Broken 1” Fault appeared,
the Makeup Cartridge can NOT be replaced until “Makeup Low” Warning
appears.
CAUTION
Full
Empty
<Remaining Makeup Icon>
Replaceable Makeup level :
After the “Makeup Level
Sensor Broken 1” Fault
appeared.
To Next Page
Loading...
Need help?
General
