●Screen display 2-6
?
Main Ink Tank Too Full
The ink level in the main ink tank is too high.
Cause 1. The valve (MV2) or valve (MV7) is faulty.
2. The High Level sensor in the main ink tank is faulty.
Solution 1. Drain proper amount of ink in the main ink tank.
2. Check the High Level sensor.
3. Contact your local distributor.
No.002
Fault
×
Close
Reset
?
◆◆◆◆◆ Main Ink Tank Too Full002
The ink level in the main ink tank is too high.
Cause 1. The valve (MV2) or valve (MV7) is faulty.
2. The High Level sensor in the main ink tank is faulty.
Solution 1. Drain proper amount of ink in the main ink tank.
2. Check the High Level sensor.
3. Contact your local distributor.
Reset
Close
HELP
(2) Message
For details of message, refer to "9. When Warning or Fault was generated".
[New HMI]
[Previous HMI]
Message name
Message type
Message No.
The Description,
Cause and
Solution
Button
Close
HELP
Message No.
Message name
HELP
The Description,
Cause and
Solution
Button
To Next Page
Loading...
Need help?
General
