Hitachi IJ UX User Manual

4-3 ●Print description screen
Press OK on the confirmation message window.
Print count will be reset to zero (0).
2
Print description 2015.07.0712:45
Menu
Com=0
[Stop ]
Ink operating time １００(hours)
Cumulative op. time １００(hours)
Print count １０００(prints)
Ink pressure  ０．０００(MPa；standard value:０．２５５)
Change
message
Select
message
Overwrite
message
Adjustprint
parameters
Operation
management
Message name[ ]
− ＋
Current user ID : user2
Inter-
laced
Printcount
reset
Startup
Manual
Makeup Ink
Printdescription 2015.07.0712:45
SETTINGS LOGINEDITADJUSTSAVEOPENHOME
Operating Time Ink Presure
（Standard Value：
0.255 ）
100h ０．０００ＭＰａ
Print Count
1.000
Makeup Ink
TEST
START PRINTING STARTUP
100% ＋−
OFFLINE
STOP
ID:User2
×
(2) Reset the print count
(a) Previous HMI
The Print description screen is displayed.
Press the Print count reset on the Print description screen.
Confirmation message of "Print count reset." will be displayed.
1
Print count reset
(b) New HMI
Press menu HOME .
The Print description screen will be displayed.
1
Press the Print count reset .
Confirmation message of "Print count reset" will be displayed.
2
Print count reset
Press OK on the confirmation message window.
Print count will be reset to zero(0).
3

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English