A-9
[Setting method]
(1) Digital operator
Select
1
by
59
A
running mode selec-
tion.
Running mode selection
0: Normal running
1: Energy conservation running
2: Fuzzy most suitable acceleration and
deceleration running
When the running starts after the data is set, the
energy conservation running is performed.
➤
➤
➤
FUNC
FUNC
0A59
1A59
(2) Remote operator
F-10 running mode selection is displayed. Dis-
play the RUN MODE screen and select “OEN”.
Running mode selection
NOR:Normal running
OEN: Energy conservation running
GOD:Fuzzy most suitable acceleration and
deceleration running
When the running starts after the data is set, the
energy conservation running is performed.
➤ ➤
F-10 RUN
RUN
RUN OEN
FS000.00 000.00Hz
MODE
MODE
FUNC
STR
MON
NOR
OEN
Initial display
To Next Page
Loading...
