Hitachi J300 Series

A-25
Appendix 7 List for display and data read/copy with each operators
(1) Monitor mode Y: Possible
N: Not possible
Display with Display with
Function No. with digital operator Data read/copy
Monitor name
HOP, HRW DOP, DRW
Alterability No. Data HRW DRW
Frequency setting
First setting FS 0.00 Hz FS0000.0 0.0 Hz Y F2 0.00 Y Y
Second setting FS 0.00 Hz FS0000.0 0.0 Hz Y F2 0.00 Y N
Multistage speed setting 1S 0.00 Hz 1S0000.0 0.0 Hz Y F2 0.00 Y N
(2)
7S 0.00 Hz 7S0000.0 0.0 Hz
Analog frequency setting TM 0.00 Hz TM 0.0 0.0 Hz Y F2 0.00 N N
(4)
Jogging frequency setting JG 1.00 Hz JG 1.0 0.0 Hz Y F2 1.00 Y Y
(5)
Option 1 frequency display O1 0.00 Hz 01 0.0 0.0 Hz Y F2 0.00 Y N
*1
(6)
Option 2 frequency display O2 0.00 Hz 02 0.0 0.0 Hz Y F2 0.00 Y N
*1
(7)
Output frequency setting 0.00 Hz FS0000.0 0.0 Hz Y d0 0.00 — —
(8)
Acceleration time setting
First setting AC1 30.00 s ACC1 0030.00 s Y F6 30.0 Y Y
Second setting AC1 30.00 s ACC1 0030.00 s Y F6 30.0 Y N
2-step acceleration time setting AC2 15.00 s ACC2 0015.00 s Y F6 15.0 Y N
Deceleration time setting
First setting DC1 30.00 s DEC1 0030.00 s Y F7 30.0 Y Y
Second setting DC1 30.00 s DEC1 0030.00 s Y F7 30.0 Y N
2-step deceleration time setting DC2 15.00 s DEC2 0015.00 s Y F7 15.0 Y N
Motor pole number settingRPM 1:4 P RPM 4P ORPM Y A25 4 Y Y
Motor rpm monitored ORPM Y d1 0.00 — —
Converted frequency setting /Hz 1.0 /Hz 01.0 0.00 Y A47 1.00 Y Y
Converted frequency monitor 0.00 Y d3 0.00 — —
Output current monitor Im 0.0 A Im 0.0 A 0.0 % Y d2 0.00 — —
Output current rate monitor 0.0 % N — — — —
Torque monitor Torque 0 % Torque 0 % N — — — —
Manual torque boost adjustment
First setting V-Boost 11 V-Boost code<11> Y F8 11 Y Y
Second setting V-Boost 11 V-Boost code<11> Y F8 11 Y N
Manual torque boost frequency
adjustment
First setting V-Boost F 10.0 % V-Boost F 10.0 % N — — Y N
Second setting V-Boost F 10.0 % V-Boost F 10.0 % N — — Y N
Output voltage gain adjustment V-Gain 100 % V-Gain 100 % N — — Y Y
Jogging frequency setting Jogging 1.00 Hz Jogging 1.00 Hz Y A61 1.00 Y Y
Analog meter adjustment ADJ 172 ADJ 172 Y F10 172 Y N
Terminal input status monitor TERM LLLLLLLLL TERM LLLLLLLLL N — — — —
Alarm display
First setting WARN # WARN # N — — Y N
*1 Represents an indication for commanding frequency from the optional PCB.
(13) (14)
(15) (16)
(17) (18)
set
value
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net