Hitachi MULTIZONE RAM-53NE3F - How to Remove Error Code

CONTROL AND FUNCTION
9-9
4 times 10 times
010
01
Abnormal power source
4 times 11 times
011
01
Fan stop for strong wind
4 times 12 times
012
01
Fan motor fault
4 times 13 times
013
01
EEPROM reading error
4 times 14 times
014
01
Active converter defective
4 times 15 times
015
01
Abnormal PWB circuit
4 times 16 times
016
01
High load stop
9.7.2 HOW TO REMOVE ERROR CODE
1. Read history error code.
2. Press (MODE) button on the remote control to set it to mode.
3. Press (TEMPERATURE) button of the remote control and set the room temperature on the remote control to 16℃.
4. Hold down press (TEMPERATURE) button for about 2 seconds, then press the (ON/OFF) button.
5. Transmission sign lights up with beep from indoor unit simultaneously and the error code will be removed.