10 Servicing
421
SMGB0064 rev.0 - 08/2011
10
Removing air outlet grille
1 Remove the eight (8) xing screws of the shroud.
1. Air outlet grille.
2. Shroud.
1
2
2
Removing upper cover
1 Remove nine (9) screws xing the upper cover and remove the
upper cover upward.
1. Upper cover.
1
Removing the bottom service cover and rear cover
1 Remove ve (5) screws xing the lower part of service cover and remove the lower part of service cover by pulling
towards front side.
2 Remove the upper cover according to the item Removing upper cover, see on page 421.
3 Remove eight (8) screws xing panel and remove the rear panel by pulling in the arrow direction.
To Next Page
Loading...
