Hitachi RAS-(3-6)HVRNM2E - Optional Parts and Installation RAS-(4-6)H(V)RNM2 E; RAS-(8;10)HRNSE

2 Unit Installation
37
SMGB0064 rev.0 - 08/2011
2
C. Rear side
Specications of snow protection hood
Product name Air discharge hood Rear suction hood Left suction hood
Model ASG-NP335F ASG-NP335FS2 ASG-NP80B ASG-NP160BS2 ASG-NP80L ASG-NP160LS2
Quantity 2 per unit 1 per unit
Material
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Bonderized steel
sheet
Iron
Stainless (NSSC
180)
Bonderized steel
sheet
Iron
Stainless (NSSC
180)
Color
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Weight 3 kg 14 kg 8 kg
Assembling Knockingdown parts (assembled at eld)
Components Hood For air discharge part x 1
For rear side air intake x 1
(Upper side x 1 lowe side x 1)
For left side air intake x 1
Unit Fixing
screw
4 (M5x12 tapping screw) 5 (M5x14 tapping screw) 6 (M5x12 tapping screw)
Unit Fixing
screw (SUS)
6 (M5x12 tapping
screw)
6 (M5x14)
12 (M5x12 tapping
screw)
12 (M5x14)
10 (M5x12 tapping
screw)
10 (M5x14)
Installation manual
Installation restriction
Installation with “Guard net” or “Wind
guard” is not available
Installation with “Guard net” is not available
Safety wire rope for overturning
prevention (optional parts)
ASG-SW20A
2.7.3 Optional parts and installation RAS-(4-6)H(V)RNM2E / RAS-(8/10)HRNSE

Air ow guide wind guard and snow protection hood
Optional parts Model
Air ow guide AG-335A X 2
1 2
3
1 Air ow guide
2 Wind Guard
3 Snow protection hood
Wind guard WSP-335A X 2
Snow
protection
hood
Zinc plate
Air outlet ASG-NP335F X 2
Air inlet of rear side ASG-NP280B
Air inlet of side face ASG-NP280L
Stainless plate
(NSSC 180)
Air outlet ASG-NP335FS 2X 2
Air inlet of rear side ASG-280BS2
Air inlet of side face ASG-NP280LS2