Hitachi RX - Circulation Control Screen Operation

6-2 ●Circulation control screen operation
Circulation control
Select option; press [Start/Cont.] Proc. status:
2015.07.0712:45
Com=0
[Stop ]
Eject ink
(Goes to Standby)
Cleaning stop No-cleaning stop
Nozzle backwash
Recovery-line
cleaning
Ink replacement
Ink filter
replacement
Ink circulation
Cancel
Makeup refill for
air removal
1st menu
2nd menu
Start/Continue
Circulation control
Select option; press [Start/Cont.] Proc. status:
2015.07.0712:45
Com=0
[Stop ]
Ink drainage
Ink refill
Circulation system
cleaning
Pressure relief
Ink stream
alignment
Cancel
Start/Continue
Parts usage time
management
Circulation system
environment setup
HOME
HOME
Prev.Dsp.
NextDsp.
Prev.Dsp.
NextDsp.
Start/Continue
Start/Continue
6.1 Circulation control screen operation
Start from the Maintenance menu.
Perform menu 1 and menu 2 switching using Prev. menu and Next menu .
1
Select the function you want to perform and press Start/Continue .
2
Different operation guides are displayed depending on the selected function.
● Perform operation in accordance with the operation guide.
● When you want to stop operation, press Abort .
3