Hitachi RX - Page 155

9-6 ●Change of Buttons, Icons and Status Colors
＝＝＝＝＝ Print Abort Confirmation ＝＝＝＝＝
Printing will be aborted.
Solution Press <OK> to abort.
O K
Cancel
184
2015.07.07 12:45
M
Manual
Message name[SAMPLE1  ]
[ ]
Shutdown
Print description
《 》
Current user ID：adminNo. 1
Com=0
Ready
Press Ready and the message “Print Abort Confirmation” appears.
Then press OK .

Standby
＝＝＝＝＝ Print Confirmation ＝＝＝＝＝
The newly created print data will be printed.
Solution Press <OK> to print.
O K
Cancel
183
2015.07.07 12:45
M
Manual
Message name[SAMPLE1  ]
[ ]
Shutdown
Print description
《 》
Current user ID：adminNo. 1
Com=0
Standby
Press Standby and the message “Print Confirmation” appears.
Then press OK .

Ready
● “Ready” state → “Standby” state switching
● With the conveyor interlock being activated by “Ready” signal, should this “Ready” signal be turned to
“Standby”, the conveyor will stop.
1
Press Ready.
Press OK.
● “Standby” state → “Ready” state switching
1
Press OK.
Press Standby.