Hitachi RX - Page 21

3-6 ●Selecting user when power is turned on
Using environment setup 2015.07.0712:45
Com=0
[Stop ]
Login method
Default login ID : 1
Admin
OK
Cancel
Disable
Enable
Startup
M
Manual
HOME
Specifies the login user
When "Disable" is selected,
the Print description screen
is immediately displayed
when the power is turned on.
OK
Using environment setup 2015.07.0712:45
Com=0
[Stop ]
OK
Cancel
Disable
Enable
Startup
M
Manual
HOME
When "Enable" is selected,
selects the user which logs
in when the power is turned
on.
OK
Login method
Press Using environment setup .
The Using environment setup screen is displayed.
2
Press Login method Enable .
3
Select the login method and press OK .
Sets whether or not to select a user which logs in when power is turned on.
4
When the Login method is "Enable", the Select login user screen is displayed when the power is turned
on. At this time, if the set password is forgotten, the program will not advance to the print description
screen. Set and manage the password carefully.
If you forget the password, consult your nearest local distributor.
CAUTION