Hitachi RX - 4.1 Print description screen (initial screen)

●Input/output (I/O) specifications 4-25
4.3.5-4 Carrying speed
●Set the minimum speed the target print is carried by conveyer to 1m/min.
●If the carrying speed the IJ printer detects is faster than the speed of when the printed without Speed
matching, print is made with the same interval as when the Speed matching function is not used.
(At the time speed exceeds the limit speed in the condition)
●If "Print Target width" or "Actual Print width" on the "Print specifications" is not entered, the print is made
with the same interval as when the Speed matching function is not used.