12
Automatic Charging Current Limit:
You can set the upper limit of the charging current when charging your NiMH
or NiCd battery. The ‘AUTO’ charging mode, however, is recommended when
charging NiMH batteries with low impedance and capacity.
Battery Meter/Battery Resistance:
The user can check the battery’s total voltage, the highest voltage, the lowest
voltage and the voltage of each cell. The user can also check the battery’s total
internal resistance and the internal resistance of each cell.
Capacity Cut-O Limit:
This feature allows the user to set a limit for the maximum mAh's that can be put
into the pack. Once this limit is reached, the charge process will automatically
terminate, and "OVER CHARGE CAPACITY LIMIT" will be displayed. Default is
5000mAh so set this accordingly to the rated capacity of the pack. To ensure the
pack gets fully charged, this setting should be at least 10% higher than the rated
capacity on the pack or turned to off .
Temperature Threshold*: (NiCd, NiMH ONLY)
The battery’s internal chemical reaction will cause the temperature of the battery
to rise. If the temperature limit is reached, the process will be terminated.
* This function is available by connecting an optional
Speci cations | Features Continued
To Next Page
Loading...
Need help?
General
