29
Nominal Voltage (V): The nominal voltage of the battery pack can be determined as follows:
NiCd or NiMH: Multiply the total number of cells in the pack by 1.2. An 8-cell pack will have a nominal voltage
of 9.6 volts (8 x 1.2).
LiPo: Multiply the total number of cells in the pack by 3.7. A 3-cell LiPo wired in series will have a nominal
voltage of 11.1 volts (3 x 3.7). 4-cell LiHV wired in a series will have a nominal voltage of 14.8 volts. (4 x 3.7).
LiIon: Multiply the total number of cells in the pack by 3.6. A 2-cell Lilon wired in a series will have a nominal
voltage of 7.2 volts (2 x 3.6).
LiFe: Multiply the total number of cells in the pack by 3.3. A 4-cell LiFe wired in a series will have a nominal
voltage of 13.2 volts. (4 x3.3).
LiHV: Multiply the total number of cells in the pack by 3.8. A 4-cell LiHV wired in a series will have a nominal
voltage of 15.2 volts. (4 x 3.7).
If the nominal voltage of the battery is not printed on the battery’s label, consult your
battery manufacturer or supplier. Do not attempt to guess the rated voltage of the
battery.
Hitec's RDX1 Mini satis es all relevant and mandatory CE directives and complies with FCC Part 15 Subpart B:
2010.
For EC directives: The product has been tested to meet the following technical standards:
Conformity Declarations | Disposal Prop 65 Warning
This symbol indicates that when this type of electronic device reaches
the end of its service life, it cannot be disposed of with normal household
waste and must be recycled. To nd a recycling center near you, refer to
the internet or your local phone directory for electronic waste recycling centers.
STATE OF CALIFORNIA PROPOSITION 65 WARNING:
This product contains chemicals known to the State of California to cause cancer.
Use caution when handling this product and avoid exposure to any electronic
components or internal assemblies.
To Next Page
Loading...
Need help?
General
