9
BATT. Type/Stop Button Start/Enter Button
Used to enter parameter
or store parameter on
screen & start charging.
Scroll through
available menus
or increase
parameter values.
Scroll through
available menus
or decrease
parameter values.
Stop the progress of
the current action
or cycle back to the
previous step / screen.
INC. Button
DEC. Button
BATT PROG / STOP Button: Stops a function in-progress or go back to the previous step or screen.
DEC Button: Scroll back through the menus or decrease the parameter value.
INC Button: Scroll forward through the menus or increase the parameter value.
ENTER / START Button:Used to enter parameter or store parameter on screen & start
charging.
When changing a parameter value in the program, press the START/ENTER button to make it blink,
then change the value by pressing the DEC and INC button. The value will be stored by repressing the
START/ENTER button. If there is a second parameter to edit on the same screen, it will begin blinking
after you con rm the rst parameter value.
When you rst power the charger on, it displays the last processes used. From here you can change
the battery type or press enter to change the charge/discharge process, charge/discharge current
rate and/or battery cell count. If you are charging a battery identical to the last one used and want to
perform the same process, then simply press the start to begin that process.
Input Functions
To Next Page
Loading...
Need help?
General
