25
Advanced Systems Set Up Continued
NiMH Sensitivity
D.Peak 4mV
NiCd Sensitivity
D.Peak 4mV
Version
HW:1.00 SW:1.06
Key Beep ON
Buzzer ON
Load Factory Set
Enter
This program is for NiMH/NiCd batteries
only. When the charger detects that the
delta peak value has reached the value
set by the user, the battery will read fully
charged.
Default: 4mV/Cell
3-15mV/Cell
OFF/ON
ITEM SELECTION
DESCRIPTION
A beep sounds with the press of each
button to con rm your action. The
beep or melody sounds at various times
during operation to alert diff erent mode
changes.
Press ENTER to load the factory default
settings.
Indicates the hardware and rmware
version.
To Next Page
Loading...
Need help?
General
