HITEC RDX1 PRO - Warnings and Error Messages; Connection and Polarity Warnings; Input Voltage Warnings; Cell and Temperature Error Messages

24
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Warnings and Error Messages
Incorrect polarity connected.
The battery connection has been interrupted.
The battery connection is wrong.
The input voltage is less than 11V.
The input voltage is higher than 18V.
Misoperation or connection error will activate
this function.
The cell number is wrong.
The internal temperature of the unit goes too high.
The external temperature of the battery is too
high. Requires optional Temperature Sensor to
be connected.
REVERSE POLARITY
CONNECTION BREAK
CONNECT ERROR
CHECK MAIN PORT
DC IN TOO LOW
DC IN TOO HIGH
CELL ERROR
CELL NUMBER
INT.TEMP.TOO HI
EXT.TEMP.TOO HI