HITEC RDX2 800 - Nimh;Nicd PROGRAM; Pb LEAD-ACID PROGRAM

20 21
NiMH/NiCd PROGRAM Pb LEAD-ACID PROGRAM
From the main menu, press the scroll button to enter the Charger’s settings. From the main menu, press the scroll button to enter the Charger’s settings.
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
Pb
2.45V
6S(12.0V)
AGM Charge
CH A
Current 5.0A
1 2

Using the scroll wheel, select the
type of battery connected.

Using the scroll wheel, select the
cell count of the battery connected.
Press scroll wheel
to confirm.
Press scroll wheel
to confirm.
3

Using the scroll wheel, select the
charge mode.
Press scroll wheel
to confirm.
4

Using the scroll wheel, select the end voltage.
Only available in discharge mode.
Press scroll wheel
to confirm.
5 6
 
Using the scroll wheel, select the
charge current.

Using the scroll wheel, select Start
and press to initiate the charge
process using the selected settings.
Press scroll wheel
to confirm.
Press the scroll button again to stop the
charge process and return to settings.
Start
Battery Type
Lilo
LiFe
LiHV
NiMH
NiCd
Pb
Battery Cell
3S
6S
12S
Task
Normal
AGM Charge
Cold Charge
Discharge
Condition
1.80V
1.90V
2.00V
Current
0.1A
10.0A
0.2A
9.9A
1

Using the scroll wheel, select the
type of battery connected.
Press scroll wheel
to confirm.
Battery Type
LiPo
Lilo
LiFe
LiHV
NiMH
NiCd
Pb
2

Using the scroll wheel, select the
cell count of the battery connected.
Press scroll wheel
to confirm.
Battery Cell
3

Using the scroll wheel, select the charge
mode. LiPo Balance is recommended.
Press scroll wheel
to confirm.
Task
Charge
Re-Peak
CYCLE_C_D
CYCLE_D_C
4

Using the scroll wheel, select the delta voltage.
The default is -6mV, recommended to skip.
Press scroll wheel
to confirm.
Condition
-3mV
-4mV
-5mV
-6mV
-7mV
-8mV
-9mV
5
 
Using the scroll wheel, select the charge current.
1C charge rate is recommended.
(IE 500mAh = 5.0A)
Press scroll wheel
to confirm.
Current
0.1A
20.0A
0.2A
19.9A
6

Using the scroll wheel, select Start
and press to initiate the charge
process using the selected settings.
Press the scroll button again to stop the
charge process and return to settings.
Start
4S
14S
5S
15S