To Next Page

To Previous Page

Network Specific — PROFIBUS 26 (38)

12.4 Network Configuration Object (04h)

The following attributes are removed in the 40–series. The Anybus CompactCom will never re-

quest these attributes. It is only possible to set these values via the network (I&M1-4) – end user

configuration.

• Instance #3, Function Tag

• Instance #4, Location Tag

• Instance #5, Installation Date

• Instance #6, Description

12.5 GSD file (PROFIBUS configuration file used by engineering

tool)

Implementation Type If the keyword “Implementation Type” is present in the GSD-file (optional

keyword), the value for the 30-series shall be “NP30” and the value for the 40-

series shall be “NP40”.

Length Related

Keywords

The following keywords are possible to set to maximum values if neeed in the 40-

series. In the 30-series the maximum lengths were dependent of the buffer mode

setting.

• Max_Input_Len

• Max_Output_Len

• Max_Data_Len

• Max_User_Prm_Data_Len

• Max_Diag_Data_Len

Migrating from Anybus

CompactCom

™

30 to Anybus

CompactCom

™

40 Design Guide SCM-1202-043 1.1

Questions and Answers:

Need help?

Do you have a question about the HMS Anybus CompactCom 30 and is the answer not in the manual?

HMS Anybus CompactCom 30 Specifications

General