Network Specific — PROFINET 28 (38)
13.2 PROFINET IO Object (F6h)
Attribute Default Anybus CompactCom Product Comment
#1, Device
ID
0007h 30-series, PROFINET IO 1-Port The Device ID controls how your
product identifies itself on the PROFI-
NET network.
If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different CompactCom PROFINET
types.
0009h 30-series, PROFINET IO 2-Port
0010h 40-series, PROFINET IRT
#3, Station
Type
“ABCC-PRT” 30-series, PROFINET IO 1-Port The Station Type defines the name
your product uses to identify itself on
the PROFINET network.
If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different CompactCom PROFINET
types.
“ABCC-PRT
(2-Port)”
30-series, PROFINET IO 2-Port
“ABCC40-
PIR”
40-series, PROFINET IRT
#8, I&M Or-
der ID
“ABCC-PRT” 30-series, PROFINET IO 1-Port If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different Anybus CompactCom PRO-
FINET types.
“ABCC-PRT
(2-Port)”
30-series, PROFINET IO 2-Port
“ABCC40-
PIR”
40-series, PROFINET IRT
#19, System
Description
“HMS Indus-
trial Net-
works Any-
bus Com-
pactCom”
30-series, PROFINET IO 1-Port If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different Anybus CompactCom PRO-
FINET types.
“Anybus
Compact-
Com PROFI-
NET IO 2-
Port”
30-series, PROFINET IO 2-Port
“HMS Indus-
trial Net-
works Any-
bus-Com-
pactCom 40”
40-series, PROFINET IRT
Migrating from Anybus
®
CompactCom
™
30 to Anybus
®
CompactCom
™
40 Design Guide SCM-1202-043 1.1