Hobby Excellent - Page 117

10. Built-in devices
113
Operating and display controls
j
Display
k
Status line
l
Menu line (top)
m
Menu line (bottom)
n
Display: 230V mains voltage (charging current)
o
Display: timer
p
Settings / values
q
Adjusting knob / pushbutton
r
Reset button
The adjusting knob / pushbutton
q
is used to select the menus
in lines
l
and
m
and change the settings. The data is shown
on the display
j
; the background is illuminated. Use the reset
button
r
to return to the previous menu.
Truma control panel “CP plus”
8
9
7
6
1
2
3
5
4
Adjusting knob / pushbutton
The adjusting knob / pushbutton
q
is used to select and change
specied values and parameters. The changes are saved by briey
pressing the button. Selected menu items blink.
Turn to the right (+)
- Goes through the menu list from left to right.
- Increases the values.
Ì ≠ªΩ
ı
ı
Ì ≠ªΩ
ı
ı
Turn to the left (-)
- Goes through the menu list from right to left.
- Decreases the values.
Press the button briey
- Saves a selected value.
- Selects a menu item; changes to the setting mode.
Press (3 seconds)
- Main function ON / OFF
- iNet-ready: use the adjusting knob / pushbutton to change the
function (see APP mode)
Reset button
Press the reset button
r
to return to the previous menu and reject
the settings. This means that the previous values will continue to
apply.