HOLDEN MY19 TJ Trax - Page 125

Infotainment system 123
Pairing a Bluetooth device
To use the Bluetooth feature, make
sure the Bluetooth on your device
is turned on and your device should
be discoverable mode. Refer to user
guide of Bluetooth device.
When there is no paired device in
the infotainment system
1. Press { on the control panel.
2. Touch Phone on the home
menu.
Or press 5 on the control panel.
Or press % on the steering wheel
remote control.
3. Touch Search Device to search
for Bluetooth phones.
4. Touch the desired device to pair
on the searched list screen.
(1) If the SSP (Secure Simple
Pairing) is supported, touch
Yes or Pair on the pop-up
screen of the your Bluetooth
device and infotainment
system.
(2) If the SSP is not supported,
input the PIN code on your
Bluetooth device as shown
on the screen.
5. When your Bluetooth device
and infotainment system is
successfully paired, the 'Phone'
screen is displayed on the
infotainment system.
If the connection fails, a failure
message is displayed on the
infotainment system.
When there is a previously paired
device in the infotainment system
1. Press { on the control panel.
2. Touch Settings on the home
menu.
3. Touch Bluetooth > Device
Management.
4. Touch the device you wish to pair
from the 'Device Management'
screen, and then follow step 6.
To add a device not in the list
touch Search Device.
5. Touch the desired device to pair
on the searched list screen.
(1) If the SSP is supported, touch
Yes or Pair on the pop-up
screen of the your Bluetooth
device and infotainment
system.
(2) If the SSP is not supported,
input the PIN code on your
Bluetooth device as shown
on the screen.