Driving and operating 143
3. Turn the key to position 3.
4. Release the key when the engine
is running.
Before restarting or to switch
the engine off, turn key back to
position 0.
Caution
Do not keep the key in position 3
for more than 10 seconds.
If the engine does not start, wait
10 seconds before trying again.
Vehicles with electronic key
system
1. Apply the park brake rmly.
2. Move the shift lever to the park
or neutral position.
3. Depress the brake pedal, and
for manual transmission also
depress the clutch pedal. Do not
operate the accelerator pedal.
4. Press and release Engine Start/
Stop button. An automatic
procedure operates the starter
with a short delay until the
engine is running.
Before restarting, or to switch off
the engine, press Engine Start/Stop
button once more.
Note
• Do not depress the accelerator
pedal while starting the engine.
• Do not subject the engine to
full throttle acceleration or high
speeds until it has reached
normal operating temperature.
Premature engine wear or
damage may result.
To Next Page
Loading...
