Holman QuikDial - Page 21

21 of 32
Setup (continued)
Zone
6. ZONE I will flash [b]
® Pressing the MENU DIAL
once when the ZONE is
flashing will allow you
to select or delete the
ZONE from the START
® As ZONE I is already
programmed to water during
this START, you can:
a. Move onto step 7 to
keep ZONEI selected
b. Press the MENUDIAL
to remove ZONE I from
the START
7. Turn the MENU DIAL
clockwise (right) and
ZONE II [c] will flash
® As ZONE II is not
programmed to water during
this START, you can:
a. Press the MENUDIAL
to select ZONE II for
the START
b. Turn the MENU DIAL
clockwise (right) and
repeat for zones III
and IV as needed
c
b