28 of 32
Cleaning
® Check and clean your filter washer at least twice a year
® Debris can be removed with a soft toothbrush and
suitable cleaner where needed (white vinegar/CLR)
® Damaged filters/washers should be replaced
® In hard water areas, further cleaning may be required after
periods of no use—as minerals will set in the body of the timer
1. Remove all tap fittings
and the neck assembly
from the timer
2. Your timer will need to be
stable and upright—an
egg carton (or similar)
may assist with this
3. Make a 50/50 white vinegar
and water solution—pour
this into the top of your timer
4. Allow it to sit for 10min
then empty the timer
and rinse well
5. Turn the timer upside
down and repeat this
on each outlet (fill outlet
with solution, allow to sit,
empty and rinse well)
Á Do not immerse your
timer in cleaning solution
Maintenance
To Next Page
Loading...
