5 of 32
Overview (continued)
Additional Functions
® Inactivity on your QuikDial Tap Timer controls for 10 seconds
will return to the default system mode displaying the current time
Á Removing the AA batteries will reset all
clock and schedule settings
® To reset your QuikDial Tap Timer, remove the batteries for
2 minutes which will return the timer to factory default
Á For use with cold water only
Specifications
7 DAY SCHEDULING Mon–Sun selection
WATERING DURATION 1‑99 minutes
WORKING PRESSURE 30‑1200 kPa
MAXIMUM FLOW RATE 25 L/min
CONNECTIONS 20/25mm BSP inlet / 20mm BSP outlet
WORKING TEMPERATURE 3°C to 50°C
BATTERIES 2× AA alkaline (not included)
To Next Page
Loading...
