Homematic IP HmIP-FALMOT-C12 User Manual

68
Troubleshooting
Aerial flashes at
intervals of 0.5 s
Radio con-
nection to wall
thermostat
failed
Change the
position of the
wall thermostat
or use a repea-
ter (see „10.1
Command not
confirmed“ on
page 64).
Exclamation mark
and aerial are
displayed
Adaptation run
completed (no
wall thermostat
paired with this
heating zone)
Pair the wall
thermostat with
the heating
zone (see „6.4.1
Pairing with a
Homematic IP
Wall Thermo-
stat“ on page
52on page
40 or „6.4.4
Teaching-in to
the Homematic
IP Access Point“
on page 55).
Activating the
humidity input
on the Multi IO
Box
Ventilate the
room and
switch from
cooling to
heating mode,
if required.

Homematic IP HmIP-FALMOT-C12 Specifications

General

Input voltage	24/230 V
Input frequency	50 Hz
Power source type	AC, DC
Maximum switching capacity	0.2 W
Frequency	869.65 MHz
Cable length	1.5 m
Display type	LCD
Product type	Heating actuator
Product color	White
Built-in display	Yes
Channels quantity	12 channels
Maximum outdoor range	320 m
International Protection (IP) code	IP20
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	52 mm
Width	242 mm
Height	85 mm
Weight	440 g
Package depth	281 mm
Package width	184 mm
Package height	97 mm
Package weight	917 g