HomeSecure HS-PRO-01 - Zone Types and Remote Control Registration

HomeSecure HS-PRO-01 Manual: 22-08-2014
Copyright © 2015 HomeSecure
13
4.3 Zone Types
You must set a zone type for each registered sensor. The zone type will define different parameters
for the sensor. See the table below for an overview.
There are eight zone types: Activity zone, perimeter zone, panic zone, fire zone, gas zone, tamper zone
and duress zone (only for the duress code, see more in [6 Phone Numbers and Access Codes]
Overview of zone types
Zone Type
Disarmed
Arm
Away
Arm
Stay
Exit Delay?
Entry
Delay?
Siren and
Flash?
Sensor
Placement
Type
Number
Entry/exit
zone
Off
On
On
Yes
Yes
Yes
Entry
door(s)
01
Activity Zone
Off
On
Off
Yes
Yes
Yes
Indoor
02
Perimeter
Zone
Off
On
On
No
No
Yes
Window
03
Panic Zone
On
On
On
No
No
Yes
Panic button
04
Fire Zone
On
On
On
No
No
Yes
Smoke
sensor
05
Gas Zone
On
On
On
No
No
Yes
Gas sensor
06
Tamper Zone
On
On
On
No
No
Yes
Tamper
switch
07
Duress Zone
On
On
On
No
No
No
Duress code
08
Normally you should set all motion detectors to the activity zone, so they will be deactivated the alarm
system is set to arm stay. Doors you want to have delay on should be set to entry/exit zone, while doors
and windows you wish no delay on should be set to perimeter zone.