HomeSecure HS-PRO-01 Manual: 22-08-2014
Copyright © 2015 HomeSecure
31
7.8 Remote Control with SMS
You can arm, disarm, home arm and request status SMS by sending an SMS to the alarm panel. Below
examples uses the master code 0808 (you can use master code, temporary code and user codes) and
panel ID is 1234.
Input the SMS exactly as shown below without spaces. The alarm panel can
only be remote controlled while in standby.
All these functions can also be performed from our App for iPhone and
Android.
Reply from the alarm panel
To Next Page