HomeSecure HS-PRO-01 - Delay Settings; Entry, Exit & Power Loss Delays

HomeSecure HS-PRO-01 Manual: 22-08-2014
Copyright © 2015 HomeSecure
43
12.1 Entry Delay
Entry Delay is the period from when you step into a sensor area to the alarm system is triggered. This
means, when you walk in through the door, you have this time to deactivate the alarm before it is
released.
At , enter the desired delay in seconds (0-300).
12.2 Exit Delay
Exit delay is the period you have to leave the sensor areas after the alarm system has been activated.
12.3 AC Power Off delay
AC Loss Delay is the time that elapses from the power goes out, to the message will be sent accordingly.
If power is restored before the delay has expired, there will not be sent any messages. If there is not
sent any AC Loss messages, there will be no confirmation that the power is restored.
At , enter the desired delay in minutes (001-255).
Delay Settings