HomeSecure HS-PRO-01 Manual: 22-08-2014
Copyright © 2015 HomeSecure
18
5.5 Install Motion Sensor:
Tamper switch. If the back panel is
removed, the switch triggers alarm.
Self-supervision – hold this button
down while the battery is inserted to
turn status signal on/off.
Detection interval:
TEST: Sensor triggers with no interval
5MIN: The sensor ”rests” for 5
minutes after triggering once to save
battery
LED on or off (saves battery).
LED indicator. Blinks when there is
activity and lights constantly when
low battery.
Sensor surface (note: Is divided for pet
immune sensors).
To Next Page
Loading...