HomeSecure HS-PRO-01 - Stop Communication

To Next Page

To Previous Page

HomeSecure HS-PRO-01 Manual: 22-08-2014

SMS message when operating:

User refers to the user who has operated the alarm system. If the

alarm panel is operated with the code, and you have named the code,

then the name will be displayed in the SMS.

Event refers to whether the alarm system is activated (Arm Away),

disabled (Disarm) or is in the zone settings (Arm Stay).

SMS when Zone Trouble:

Zone refers to the sensor that triggers Zone Trouble (number and

name).

Event refers to which System Trouble that is the case. It may be low

battery, signal etc. For more information see [7.5 System Trouble

(System Error)] on page 30.

9.4 Stop communication

All communication buffers and pending messages are deleted with this action. This function is used eg.

by false alarms or the like.