HomeSecure HS-PRO-01 - Phone Numbers and Access Codes; Set Access Codes

HomeSecure HS-PRO-01 Manual: 22-08-2014
Copyright © 2015 HomeSecure
20
6.1 Set Access Codes
We highly recommend that you change all access codes from the standard
ones once the installation is complete.
There are five types of access codes: Master code, installation code, duress code, temporary code and
user code (x4). Each code type has different functions. As standard, only the master code, installation
code and duress code are set. You must create the remaining codes to be able to use them. See the
table below for an overview of the code types, and what you can do with each of them:
Kodetype
Arm/disarm
Enter
PROG
Code set
”PROG” in
main menu
Editable
Deletable
Standard code
Master
Yes
Yes
Yes(1)
Nej
Yes
No
0808
Installation
Nej
Yes
Yes(2)
Yes
Yes
No
1234
Duress
Yes
No
No
No
Yes
No
0809
Temp.
Yes
No
No
No
Yes
Yes
User 1
Yes
No
No
No
Yes
Yes
User 2
Yes
No
No
No
Yes
Yes
User 3
Yes
No
No
No
Yes
Yes
User 4
Yes
No
No
No
Yes
Yes
(1) All codes except the installation code can be changed with the
master code.
(2) Only the installation code itself can be changed with the
installation code.
Phone Numbers and Access Codes