Honeywell Accenta Engineer's Manual

Accenta/Optima Engineer’s Manual
16
Engineer Program Mode
The panel may be programmed to suit a wide variety of installations.
Once the Engineer program mode has been accessed, each configuration may be changed in any order.
Before entering Engineer program mode the system should be unset, with the and indicators lit.
Indications on LED Keypads
Table 1. LED Indications
System Indications
System Unset
System Set
System Set indication
LCD Indications LED Indications
Engineer Program Mode
System Unset indication
LED Indications
LED steady on indication
LED flashing indication
LED off
Output to Alarm Receiving Centre
Communicator outputs are not applicable
for Optima Compact panel.
Internal Sound. In general, a long beep is an
indication of an incorrect key press
External Device: Strobe
External Device: Siren
To exit operation
Quit the current function
Leave program menu
Return one menu level

Honeywell Accenta Specifications

General

Tamper Circuit	Yes
Event Log	Yes
Battery Backup	Yes
Keypad	Wired
Power Supply	230V AC, 12V DC