Honeywell Accenta Engineer's Manual

Accenta/Optima Engineer’s Manual
21
Test Outputs
3 = System Flags
The System Flags are divided into Flags 1, 2 or 3.
LCD Keypad:
• Press
to display menu System Flags.
• Press [3] or to display the next screen.
LED Keypad:
• Press [3]. LED’s 1, 2 and 3 are ON.
Flag 1
NOTE: Pressing [9] sets all flags ON. Pressing [0] sets all flags
OFF. Pressing leaves the function.
LCD Keypad:
• Press [1] to display first option of System Flag 1. Press [1]
to toggle flag ON or OFF.
• Press [1-8] or to go to another option under Flag 1.
• Press to save change then to leave menu
OR press twice to leave menu.
.
LED Keypad:
• Press [1] to show status of first option of System Flag 1.
Press [1] or to toggle flag ON or OFF.
• Press [1-8] to go to another option of Flag 1.
• Press to save change then to leave menu
OR press twice to leave menu.
.
12
3
4
5
6
7
8
[3]
System Flags
1, 2 or 3?
System Flags
[3] or
[1]
Silent PA
NO
RKP PA
YES
[1-8] or
then
System Flags
12
3
4
5
6
7
8
[1]
[1-8]
then
12
3
4
5
6
7
8
12
3
4
5
6
7
8

Honeywell Accenta Specifications

General

Tamper Circuit	Yes
Event Log	Yes
Battery Backup	Yes
Keypad	Wired
Power Supply	230V AC, 12V DC