Honeywell Accenta Engineer's Manual

Accenta/Optima Engineer’s Manual
41
LED Keypad:
While in Engineer program mode, to set the Exit Mode ,
• Press to give a choice of programs.LED’s 1,
2 and 3 are flashing.
• Select program 1, 2 or 3. If program 2 is selected,
LED 2 is ON.
• Press [6] to enter into Exit Mode edit. The Exit Mode can
now be changed.
• Enter [0, 1, 2 or 3] for required Exit Mode. Appropriate
LED is ON for selected mode (1 = disabled, 2 = timed,
3 = final door, 4 = silent timed)
NOTE: Program Mode DISABLED is not available in program 1.
• Press three times to save change and leave menu.
Programs (contd)
[2]
[6]
12
3
4
5
6
7
8
[0, 1, 2 or 3]
12
3
4
5
6
7
8
12
3
4
5
6
7
8
12
3
4
5
6
7
8
12
3
4
5
6
7
8

Honeywell Accenta Specifications

General

Tamper Circuit	Yes
Event Log	Yes
Battery Backup	Yes
Keypad	Wired
Power Supply	230V AC, 12V DC