Honeywell Accenta User Manual

Accenta/Optima User Guide
8
How to Set Up Chime Mode
Chime is a low security facility for use when the system is unset. It is particularly useful in a shop to warn of
customers presence, or in a house to warn when a back door has been opened. When a Chime zone detects
movement the system will produce a brief two–tone sound, and the Zone LED will come on.
To set any zone to Chime.
LCD Keypad:
• The system should be in Day mode (System Unset).
• Press [CHIME]. The screen will show the first zone that is
already set up for Chime (possibly none).
• Press the zone [number] to toggle it in and out of chime.
• When you have finished using the Chime mode press [RESET]
or wait a few seconds for the display screen to show Day mode.
LED Keypad:
• The system should be in Day mode (System Unset).
• Press [CHIME]. The zone LED’s will come on to show those
zones that are already set up for Chime (possibly none).
• Press the zone [number] to toggle it in and out of chime.
• When you have finished using the Chime mode press [RESET] or
wait a few seconds. The zone LED goes off.
[CHIME]
Zn: DescriptorZn: Descriptor
Zn: DescriptorZn: Descriptor
Zn: Descriptor
Chime:Chime:
Chime:Chime:
Chime:
NONO
NONO
NO
[Number]
[RESET]
Zn: DescriptorZn: Descriptor
Zn: DescriptorZn: Descriptor
Zn: Descriptor
Chime:Chime:
Chime:Chime:
Chime:
YESYES
YESYES
YES
SundaySunday
SundaySunday
Sunday
01-Jan01-Jan
01-Jan01-Jan
01-Jan
14:10 14:10
14:10 14:10
14:10
How to Set Up Chime Mode
NOTE: Zn = Zone number
[CHIME]
[Number]
Power
Attack
Tamper
Day
Zones
1
23
4567
8
[RESET]
Power
Attack
Tamper
Day
Zones
1
23
4567
8
Power
Attack
Tamper
Day
Zones
1
23
4567
8

Honeywell Accenta Specifications

General

Tamper Circuit	Yes
Event Log	Yes
Battery Backup	Yes
Keypad	Wired
Power Supply	230V AC, 12V DC