Honeywell Accenta User Manual

Accenta/Optima User Guide
16
LCD Keypad:
• Press [PROG] and then enter your code [0][1][2][3]. The
Day LED goes off to indicate that you are in Programming
mode. The first menu Walk Test appears on the screen.
• Press [up arrow] for menu Alarm Test.
• Press [1] or [SET] to enter into first function ON or OFF.
• Press the [up arrow] or number [2] or [3] for the other functions.
• Press [RESET] to leave the menu.
1>Alarm Test1>Alarm Test
1>Alarm Test1>Alarm Test
1>Alarm Test
[up arrow]
[1] or [SET]
01:Bell01:Bell
01:Bell01:Bell
01:Bell
OFFOFF
OFFOFF
OFF
[up arrow] or [Number]
02:Strobe02:Strobe
02:Strobe02:Strobe
02:Strobe
ONON
ONON
ON
[RESET]
1>Alarm Test1>Alarm Test
1>Alarm Test1>Alarm Test
1>Alarm Test
LED keypad
• Press [PROG] and then enter your code [0][1][2][3]. The
Day LED goes off and the Tamper (TA) LED comes on
to indicate that you are in Programming mode.
• Press [1] for menu Alarm Test.
• Press [1] or [SET] to toggle first function ON or OFF.
• Press number [2] and [3] for the other functions.
• Press [RESET] twice to exit Programming mode. The Day
LED comes on and the Tamper (TA) LED goes off.
[1]
[1] or [SET]
12
3
4
5
6
7
8
[RESET]
[2]
12
3
4
5
6
7
8
12
3
4
5
6
7
8
12
3
4
5
6
7
8
Power
Attack
Tamper
Day
Zones
1
23
4567
8
[PROG] then [0][1][2][3]
0>Walk Test0>Walk Test
0>Walk Test0>Walk Test
0>Walk Test
[PROG] then [0][1][2][3]
How to Test Alarm System

Honeywell Accenta Specifications

General

Tamper Circuit	Yes
Event Log	Yes
Battery Backup	Yes
Keypad	Wired
Power Supply	230V AC, 12V DC