BW RigRat User’s Guide
71
18. Specifications
Instrument Specifications
15.75” x 11.4” x 18.5” (400 x 290 x 470 mm)
Rechargeable Li-ion battery, 3.7V/26.4Ah
Note: All battery specifications at 20° C; lower temperatures might affect runtime.
3.5” 240 x 320 TFT color LCD with white LED backlight
• Real-time reading of gas concentrations; battery status; datalogging on/off; wireless on/off and wireless
reception quality.
• STEL, TWA, peak, and minimum values
• Policy enforcement indicator
• GPS quality indicator (if GPS equipped)
1 pushbutton for operation and programming
Pumped (typical flow rate of 450cc/min) or Diffusion
Device Configurator mobile application, or manual
• Red/Yellow/Green bright LED alarm
• Buzzer alarm 108dBA @1m
• On-screen indication of alarm conditions
• Gas sensors and GPS data at one minute internal for 4 months
• Datalogging interval setting: 1 to 3600 sec (default: 1 min)
Outdoor, GPS, 10m accuracy, Optional
Up to 4dBm/2.5mW(BLE); up to 17dBm/50mW(Mesh); up to 11dBm/12.5mW(Wi-Fi)
IP65 for Pumped; IP67 for Diffusion.
-20°C to +60°C (-4°F to 140° F) for Pumped; -40°C to +60°C (-40°F to 140° F) for Diffusion, depending on
sensor specification.
5% to 95% RH Non-Condensing
IEC Ex NEP 20.0003X
Ex ia IIC/IIB T4 Ga
Ex da ia IIC/IIB T4 Ga
Ex db ia IIC/IIB T4 Gb
FCC Part15; IC; RE-D (2014/53/EU)
(Contact us for wireless approval availability, country-specific)
RoHS Directive (EU) 2015/863
60 to 125dBA range (Response: 100Hz to 8kHz), 1dB resolution
A-weighted 15 second equivalent level. Updated every 5 seconds