6 CT30 XP Mobile Computer User Guide
Swap Battery Mode
Swap Battery mode places the computer in a lower power state so that the battery
can be removed for a short time.
To activate Swap Battery mode:
1. Press and hold the Power button until the options menu appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.
Replace the Battery
Remove the battery
1. Either power off the computer or place it in battery swap mode. See Before
Attempting to Remove the Battery on page 5.
2. Release the hand strap, if applicable.
3. Pull down on the battery latch to unlock the battery.
4. Lift up on the edge of the battery and remove it from the computer.
Caution: Improper battery replacement or incompatible device usage may
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
To Next Page
Loading...
Need help?
General